Home > News > Content

Precautions For The Use Of Ultra-thin Turbine Blades And Market Mainstream

Jul 03, 2017

    Before use should confirm whether the saw blade has the breakage, if has the breakage, forbids to use. When assembling, the motor shaft and saw blade center hole Germany cooperate, the error must be less than 0.1mm. Note that the direction of the arrow indicated on the saw blade is consistent with the direction of the tool being rotated. When cutting, please do not apply side pressure and curve cutting, into the knife to smooth, avoid the blade impact contact the workpiece, in order to avoid danger. Dry-cut, do not carry out long time continuous cutting, so as not to affect the life of the saw blade and cutting effect, wet slice cutting, should add water cooling, beware of leakage. Experts suggest, after the saw piece is installed, should be idling a few minutes first, confirm no swing or beat, after the grinding wheel or refractory brick on the first try to cut a few knives, and then normal work effect is best. If the sharpness of the saw blade is not enough, please use silicon carbide to sharpen the blade. Cutting Confidential has a safety shield, operators must wear safety clothing, glasses, masks and other protective supplies.
    A lot of consumers think that the server or mainstream video card attached to the "Turbo" fan is slag, should not appear in the mass market, in fact, this is a big misunderstanding, in fact, the market sales of thin Turbo fan, its sales have been far ahead, small turbo fan has a higher speed and air volume, the diameter of the heat is also from the top to the side, but many consumers think this type of fan has a larger mishap, that is, the huge "noise."Ultra-thin turbine blades
At first, this radiator with turbine fan products only used in the server, mainly because the server is thinner, but now with the ITX of the small chassis more and more, this small radiator is also popular up, the bottom of the radiator if accompanied by the hot plate so heat dissipation will be stronger. It must be said that many netizens have started to swear, but the author also admitted that the turbo radiator actually belongs to a kind of noise performance than very low thermal products, the use of turbo-type heat dissipation is more of a design for the volume trade-off, but if the single look at the heat dissipation, with similar cooling volume to achieve the same effect, the use of turbo-radiator is necessarily the best!Ultra-thin turbine blades
    Note that the direction of the arrow indicated on the saw blade is consistent with the direction of the tool being rotated. When cutting, please do not apply side pressure and curve cutting, into the knife to smooth, avoid the blade impact contact the workpiece, in order to avoid danger. Dry-cut, do not carry out long time continuous cutting, so as not to affect the life of the saw blade and cutting effect, wet slice cutting, should add water cooling, beware of leakage. Experts suggest, after the saw piece is installed, should be idling a few minutes first, confirm no swing or beat, after the grinding wheel or refractory brick on the first try to cut a few knives, and then normal work effect is best. If the sharpness of the saw blade is not enough, please use silicon carbide to sharpen the blade.Ultra-thin turbine blades